Author: Zack Snyder

The additional space will allow for the hiring of additional engineers and staff.

These additional 12 clarifiers make a total of 30 purchased by the same customer. Customer states they are user friendly and easy to maintain.

Our Solution:   Provide two Emulsion Cracking Systems (ECS) to remove emulsified oils from a waste stream.   Operators state that the systems are easy to operate and maintain.  Each system includes the following:

1. Tank manufactured in 304 stainless-steel with fiberglass walkway grating
2. Mixers
3. Chemical pumps
4. pH probe assemblies to automatically control the chemical pumps
5. Integrated walkway
6. On site project management and programming

Our Solution:   Provide a bulk bag discharge system. System includes the following:

1. Heavy duty bulk bag lifting frame
2. Bulk bag liner clamp
3. Bag tensioning frame
4. Bulk bag spout closure bars
5. Discharge chute/hopper

• 

• 

• 

Our Solution:   Provide a custom filter press to dewater sludge. System includes the following:

1. Automatic plate shifter
2. Hydraulic Power Unit (HPU) in its own enclosure
3. Actuated valves
4. Bombay doors
5. Safety light curtains and custom guarding to meet customers safety specifications
6. Training

• 

Our Solution:   Provide two Activated Carbon Systems to remove organic contaminant from a waste stream.  Systems include:

1. 304 stainless steel skids
2. Spiral wound FRP tanks
3. Sch.80 PVC pipe
4. Pneumatic diaphragm control valves
5. On site programming

• 

• 

• 

Our Solution:   Provide a 100 cubic foot filter press to dewater sludge. System includes:

1. 100 cubic foot filter press with superior safety features to keep operators safe
2. Walkway assembly – frame/kickplates/posts made in A-36 carbon steel
3. Two dual AOD pump assemblies to feed the filter press

• 

• 

Our Solution:   Provide a CAS and IPC system to remove metals from a waste stream.  System includes:

1. A-36 carbon steel tanks with coal tar epoxy interior/polyurethane exterior coatings
2. Sludge auger in IPC to convey sludge to a sludge outlet port
3. Sludge pump to convey sludge from IPC to a sludge holding tank
4. Effluent pump to convey IPC processed water to sewer
5. Expanded effluent chamber in IPC
6. OSHA platform to view inside of both tanks
7. NEMA 4X 304 stainless steel control panel
8. Entire system mounted to a common skid for quick installation

• 

• 

Our Solution:   Provide an Oil Water Separator to remove oils and grease from a waste stream.  Tank includes:

1. A-36 carbon steel tank with coal tar epoxy interior and polyurethane exterior coatings
2. PVC coalescing media
3. Lids to allow for outdoor installation
4. Expanded effluent chamber

• 

• 

Our Solution:   Provide a custom designed sludge holding tank.  Tank includes:

1. A-36 carbon steel tank with coal tar epoxy interior and polyurethane exterior coatings
2. Ladder assembly for access to the top of the tank
3. Safety handrails around the top of the tank
4. Several flanges along the side and in the top of tank
5. Inspection hatch located in top of tank for quick inspection